Please Note: We will always have this product in stock unless otherwise noted.  Please disregard the stock status shown above. Due to our inventory system, it sometimes gets out of sync and is sometimes difficult to correct with this particular item.

This Air Rig is custom assembled by our PolarStar technicians here at Amped Airsoft and is customized with the recommended specifications supplied by PolarStar Airsoft.  This Rig utilizes a custom AKA SST Low Pressure Regulator that is easily adjusted via a simple allen key for PSI adjustment similar to that of our previous Palmer Regulator setups.

This specific Air Rig utilizes 3 feet of nylon tubing , which through R&D, we have found is one of the most efficient setups when it comes to comfort.  If you find that the nylon line is too long, no problem! All you have to do is cut it down to a size that works best for you and you are good to go!  If you ever need more line, we have it readily available here on our website under our Air Rig section. This Air Rig will fit more easily into hydration packs and pouches.  We have found that it works best when the line is run under your dominant shooting arm. 

This setup will work with any typical Paintball High Pressure (HPA) or Super Low Pressure (SLP) compressed air tanks. If you are in need of an HPA tank, we have them available in our PR-15 tank section. 

Note: The PR-15 runs at a max pressure of 120 PSI and a min pressure of 80 PSI.  This Air Rig will allow you to regulate within this pressure range. Do not go above 120 PSI, as it can damage your PolarStar Fusion Engine .  We always recommend to return your PSI setting to the lowest setting possible before changing to a different type of output tank.  For example, switching from a 250 PSI output tank to a 650 PSI output tank. Please check with your tank instructions if you are curious as to what output pressure your tank operates.  

This Air Rig comes with everything you need to attach your PR-15/Fusion Engine to your choice of HPA tank. 

We will be offering international shipping for all PolarStar products.
Please email us at sales@ampedairsoft.com to discuss further shipping details.